Cuda 4860 Front-Load Parts Washer
200 GPM of Cleaning Power for the Heaviest Parts in Your Shop
When your parts are measured in feet and weighed in tons, you need a washer that does not compromise. The Cuda 4860 delivers the highest standard pump output in the Cuda line — 200 GPM at 50 PSI from a 7.5 HP vertical seal-less pump, with an optional 10 HP upgrade for operations that demand even more. A 48-inch turntable diameter and 60-inch working height mean you are cleaning large diesel engine blocks, transmission housings, axle assemblies, and heavy industrial components without disassembling them first.
The 4860 carries a 5,000-pound load capacity on a 3/8-inch steel turntable with sealed tapered roller bearings — built to handle the concentrated weight of cast iron and steel components cycle after cycle. Twenty-six spray nozzles surround the wash chamber, and a 156-gallon sump provides the water volume needed for extended cleaning runs without temperature drop.
Industrial-Grade Certification
The 4860 is built in an ISO-9001 registered factory and listed by Intertek/ETL to the UL73 safety standard — certifications that matter when your facility’s EHS team needs documentation for compliance audits. The 12-gauge steel cabinet, 7-gauge steel tank, and 14-gauge steel door are finished with industrial powder coat for corrosion resistance in demanding shop environments.
A dual 9 kW Incoloy-sheathed heating system delivers 18 kW of heat to reach and maintain operating temperatures of 150° to 190°F — the highest temperature range in the Cuda line, enabling faster cleaning of heavily contaminated parts.
Specifications
| Specification | Value |
|---|---|
| Type | Front-Load Cabinet Washer |
| Turntable Diameter | 48″ |
| Working Height | 60″ |
| Load Capacity | 5,000 lbs |
| Spray Nozzles | 26 |
| Pump | 7.5 HP (10 HP optional) Vertical Seal-less |
| Flow Rate | 200 GPM @ 50 PSI |
| Sump Capacity | 156 gallons |
| Heaters | (2) 9 kW Incoloy = 18 kW total |
| Operating Temp | 150°–190°F |
| Machine Dimensions | 75″L × 66″W × 105″H |
| Ship Weight | 2,457 lbs |
| Voltage Options | 230V/3Ph, 460V/3Ph, 575V/3Ph |
| Cabinet | 12-ga steel cabinet, 7-ga steel tank, 14-ga steel door |
| Certifications | ISO-9001, ETL/UL73 |
Standard Features
- 60-minute wash timer, 12-hour heater timer, 30-minute skimmer timer
- Turntable jog switch for precise positioning
- Roll-in door with safety interlock
- Automatic oil skimmer with fan-cooled motor and dual SS scraper blades
- Pull-out debris screen
- Low water shutdown with indicator
- Adjustable thermostat
Industries We Serve with the 4860
- Steel mills and heavy manufacturing
- Large engine rebuilders
- OTR truck and diesel repair
- Construction and mining equipment maintenance
- Railroad component shops
Calumet Chicago is your authorized Cuda distributor and service center. We provide installation, training, and preventative maintenance — and we stand behind every machine we sell. Call (708) 474-2343 for a quote or to schedule a demonstration at your facility.