Locomotive Shop Motor & Rail Component Cleaning — CUDA 3648
Locomotive maintenance shops and railcar repair facilities handle a constant stream of components that must be stripped to bare metal before teardown, electrical testing, or precision rebuild—auxiliary motors, traction motor housings, air brake valves, compressor assemblies, and journal bearing components caked with years of traction gear grease, diesel soot, and track grime. When components wait in a manual wash bay, locomotive availability suffers.
In this project, Calumet Chicago Company demonstrated the cleaning of a heavily fouled auxiliary motor housing at a regional locomotive shop using a Cuda 3648 front-load automatic aqueous parts washer. Loaded onto the 36-inch motorized turntable by overhead hoist, the motor ran through a single 15-minute automated wash cycle at 165°F with Cuda 1993 “The Original” multi-metal detergent. The Cuda 3648’s 7.5 HP vertical seal-less pump delivered 150 GPM at 50 PSI, flushing baked-on carbon and grease out of cooling fins, end-bell vents, and mounting bosses so the housing arrived at the rebuild bench clean and dry. (Looking for smaller steel-mill slab-carrier motor washing in a compact top-loader? Compare our Steel Mill Slab-Carrier Motor Cleaning in a Cuda SJ-15.)
The Cuda 3648 is a staple in Midwest railroad backshops because its 2,500-pound load capacity and 48-inch working height accommodate mid-size locomotive and railcar assemblies while eliminating chlorinated and petroleum solvent hazards. Paired with Calumet Chicago’s 20-Point Bimonthly Preventative Maintenance & Wastewater Reclaim Program, railroad maintenance crews keep sump chemistry consistent without pulling mechanics off revenue repair work.
Complete Railroad Shop Support — Cuda Parts Washers & Certified Duff-Norton Railroad Jack Repair: In addition to supplying and servicing Cuda parts washers for locomotive and car shops across Chicagoland and Northwest Indiana, Calumet Chicago is an authorized distributor and factory repair center for Industrial & Railroad Jacks—including Duff-Norton CMJ Air Motor Railcar Jacks (20–100 Ton) and Duff-Norton Bossman Hydraulic Locomotive Jacks (50–150 Ton).
Explore Equipment & Service Options: Cuda 3648 Front-Load Parts Washer | Cuda 2840 (1,000-Lb) Washer | Cuda 4860 (5,000-Lb) Washer | Cuda 1993 Detergent Guide | CUDA Parts Washer Sizing Calculator | Turnkey Lease ($350/Mo), Purchase, or Outsource | Railroad Jack Repair | All Before & After Projects












