Drop-Off Parts Cleaning & Free Trial Cleans in Highland, Indiana
Got a teardown batch of greasy gears, bearings, strainers, engine heads or transmission casings—and no good way to clean them? Bring them to Calumet Chicago Company at 9900 Express Drive, Highland, Indiana. We wash everyday maintenance parts in the same Cuda aqueous parts washers we sell, lease and service, so your mechanics can get back to repair work instead of scrubbing parts over a solvent tank.
Our Cuda washers run hot water (150°F–190°F), spray pressure and genuine Cuda 1993 multi-metal detergent to lift grease, oil and sludge—no solvent fumes and no solvent waste for your shop to handle. It’s also the easiest way to see what a Cuda washer could do on your own shop floor.
Three Ways to Use Our Highland Shop
- Drop-Off Batch Cleaning (Paid): Drop off a basket or batch of maintenance parts—gears, bearings and housings, strainers, pump parts, engine heads, transmission casings, bolts and fittings. We wash them and call you when they’re ready for pickup.
- Free Sample Test Clean (Coordinated with a CCC SME): Evaluating a Cuda parts washer purchase or lease? Bring in a representative dirty part. A Calumet Chicago Subject Matter Expert (SME) runs it through the right Cuda washer and gives you before-and-after results plus a model recommendation for your shop.
- Overnight-Heated On-Site Trial at Your Facility (Coordinated with a CCC SME): Want your crew to try a Cuda washer in your own bay? We verify your electrical service and floor space, deliver and fill a trial washer, and set the heater timer for overnight pre-heating—so your technicians start the morning with a hot washer ready for real parts.
Drop Off a Batch or Schedule a Free Trial Clean
Call before you come in with what the parts are, roughly how big and heavy they are, and what they’re coated with. We’ll confirm they fit our washers and set a drop-off time.
Call: (708) 474-2343
Drop-Off Location:
9900 Express Drive, Highland, IN 46322
Drop-Off Hours: Monday–Friday, 7:00 AM – 3:00 PM CST
Email: sales@calumetchicago.com
Request a Batch Quote or Trial See our Turnkey Lease Program
Ready to Bring Cleaning In-House?
Lease a Cuda 2412 from $350/month, with monthly turnkey leases on the SJ-15 and front-load models. At 30 minutes of hand cleaning per technician per day, manual scrubbing can cost up to $9,375/year per technician (at $75/hr).
Everyday Maintenance Parts We Clean at Our Highland, IN Shop
Drop-off cleaning is built for the ordinary parts that come off your equipment during maintenance and teardown. See real results in our See It in Action — Before & After Portfolio:
| Parts | Typical Soils & What You Get Back | Cuda Washers That Handle Them | Before & After Examples |
|---|---|---|---|
| Gears, Sprockets & Shafts | Gear grease and oil sludge removed from teeth, hubs and keyways so parts can be inspected and reassembled. | Cuda 2412, SJ-15 & 2530 | See It in Action |
| Bearings, Bearing Caps & Pillow-Block Housings | Packed grease and dirt washed out of housings, caps and bores for inspection and re-greasing. | Cuda 2412 & 2530 | Bearing Components — CUDA 2412 | Bearing Caps — CUDA 2530 |
| Strainers, Screens & Pump Parts | Oily residue and debris flushed out of strainer baskets, screens, small pumps and fittings. | Cuda 2412 & SJ-15 | Steel Mill Pump — CUDA 2412 |
| Engine Heads, Transmission Casings & Small Motor Housings | Oil, grease and road grime removed from castings so gasket surfaces, passages and threads can be checked before rebuild. | Cuda SJ-15, 2530 & 2840 | Small Motor — CUDA SJ-15 |
| Bolts, Washers, Collars & Fittings | Basket batches of hardware washed so threads come back clean for reassembly. | Cuda 2840 / 2848 & 2412 | Bolts, Washers & Collars — CUDA 2840 |
Not sure if a part is a fit? Call (708) 474-2343 with approximate dimensions, weight and what it’s coated with before you bring it in. Very large or very heavy components may be better handled another way, and we’ll tell you up front.
Also bringing in hydraulic or air-motor jacks? Calumet Chicago Company is an Authorized Service Center for Duff-Norton, Simplex, Enerpac & Hydra-Tech Industrial & Railroad Jacks—drop off parts for cleaning and jacks for repair at the same Highland, IN location.
Try It First: Free Test Clean at Our Shop or On-Site Trial at Yours
Not sure an aqueous washer will cut through your grease, oil or drawing compound? Before you sign a Turnkey Lease or purchase order, work with a Calumet Chicago Subject Matter Expert (SME) using whichever option fits your shop:
| Option | Where It Happens | How It Works | Best For |
|---|---|---|---|
| Option 1: Free Sample Test Clean | Calumet Chicago Shop 9900 Express Drive, Highland, IN 46322 | Drop off a representative dirty part. Our SME runs a timed wash cycle with Cuda 1993 detergent, takes before/after photos, and confirms the right washer size. | Quick proof when deciding which Cuda model (2412, SJ-15, 2530, 2840, 2848 and up) fits your parts. |
| Option 2: Free Overnight-Heated On-Site Trial | Your Maintenance Bay NW Indiana (Lake, Porter, LaPorte) & Greater Chicago | Our SME checks your power and floor space, delivers and fills a trial Cuda washer, and sets it to heat overnight so it’s at full operating temperature when your shift starts. | Letting your technicians and supervisors try a washer on their own parts before leasing or buying. |
| Option 3: Paid Drop-Off Batch Cleaning | Calumet Chicago Shop Drop-off and pickup in Highland, IN | Quoted per batch or basket. We wash and rinse your parts and call you when they’re ready. | Occasional teardown batches, or shops that aren’t ready for a washer of their own yet. |
| Option 4: Turnkey Lease or Direct Purchase | Installed at Your Facility Backed by bimonthly CCC service | Cuda 2412 from $350/month; monthly turnkey leases on SJ-15 and front-load models 2840 thru 7248. Includes delivery, installation, operator training, Cuda 1993 detergent & OEM parts support, and bimonthly PM & non-hazardous wastewater reclaim. | See our Turnkey Lease Program → |
Frequently Asked Questions — Drop-Off Parts Cleaning & Cuda Trials
1. What types of parts can we drop off for cleaning in Highland, Indiana?
Everyday maintenance and teardown parts—gears, bearings and bearing housings, strainers and screens, pump parts, engine heads, transmission casings, small motor housings, and baskets of bolts, washers and fittings. Call (708) 474-2343 with approximate dimensions, weight and what the parts are coated with so we can confirm the fit and schedule your drop-off.
2. How does the Overnight-Heated On-Site Trial work?
Aqueous cleaning works best hot (150°F–185°F), and a freshly filled sump takes several hours to heat. A Calumet Chicago Subject Matter Expert (SME) checks your bay power, delivers and fills the trial Cuda washer, and sets the heater timer to bring it up to temperature overnight. When your mechanics arrive the next morning, they can load real teardown parts and see the results right away.
3. Can aluminum, brass and cast-iron parts be cleaned together?
Yes. We use genuine Cuda 1993 The Original multi-metal detergent, formulated to clean cast iron, steel, stainless steel, aluminum and brass without the etching or darkening that harsh caustic cleaners can cause.
4. When does it make sense to get our own Cuda washer instead of dropping parts off?
If your technicians spend even 30 minutes a day cleaning parts by hand ($37.50/day or $9,375/year per technician at a $75/hour shop rate), an in-house Cuda washer usually pays for itself quickly. Lease a Cuda 2412 from $350/month, choose a monthly turnkey lease on a larger model, or buy outright—and keep our Highland shop for the occasional overflow batch.
