Cuda 2848 Front-Load Aqueous Parts Washer

HomeCuda 2848 Front-Load Aqueous Parts Washer

Cuda 2848 Front-Load Parts Washer
48-Inch Working Height, 1,000-Pound Capacity, and 110 GPM of Cleaning Power

Cleans large parts as easily as small. The Cuda 2848 Front-Load Automatic Aqueous Parts Washer takes the compact 28-inch turntable footprint and 1,000-pound load capacity of the Cuda 2840 and upgrades both vertical clearance and pump output — delivering a full 48-inch working height and a heavy-duty 5 HP vertical seal-less pump producing 110 GPM at 50 PSI through 18 positioned spray nozzles.

Cuda's 2848 automatic parts washer is ideal for over-the-road (OTR) truck and diesel repair facilities, 6-cylinder diesel engines, agricultural and implement dealers servicing large 4-wheel-drive tractors, and Midwest industrial maintenance shops that need 48 inches of vertical height and more than double the water flow of a 3 HP washer without stepping up to a 36-inch cabinet footprint.

Single-Phase or Three-Phase Flexibility with 5 HP / 9 kW Performance

The Cuda 2848 is the highest-output Cuda front-load washer available in both single-phase (208V or 230V, 1Ph) and three-phase (208V, 230V, 460V, or 575V, 3Ph) electrical configurations. A 9 kW electric heater brings the 50-gallon sump to 150°–180°F to cut through baked-on diesel soot, gear oil, hydraulic fluid, and heavy grease without harmful cleaning solvents. Inside the chamber, a retractable intermediate spray arm rotates down to clean small parts with or without the optional double-basket, so one machine handles both tall upright engine blocks and small component batches.

Cuda 2848 front-load automatic aqueous parts washer with 28-inch turntable, 48-inch working height, space-saving roll-in door, left-mounted control panel, front debris screen drawer, and 5 HP 110 GPM pump
Cuda 2848 Front-Load Aqueous Parts Washer — 51″L × 50″W × 83″H footprint, 28″ turntable, 48″ working height, 1,000-lb capacity, 5 HP vertical seal-less pump (110 GPM @ 50 PSI), 9 kW heater & 1Ph or 3Ph power (Monthly Turnkey Lease Available).

Need a 40-inch working height with lower 3 HP amperage draw? Compare the Cuda 2840 (28″ turntable, 40″ working height, 3 HP / 50 GPM). Need a wider 36-inch turntable and 2,500-pound capacity at the same 48-inch working height? Step up to the Cuda 3648 (36″ turntable, 48″ working height, 7.5 HP / 150 GPM).

Specifications   View PDF

SpecificationValue
TypeFront-Load Automatic Cabinet Washer
Turntable Diameter28″
Working Height48″
Turntable Load Capacity1,000 lbs (determined with even weight distribution)
Number of Nozzles18
Pump Motor5 HP — Vertical — Seal-less
Pump Capacity (Flow Rate)110 GPM @ 50 PSI
Sump Capacity50 gallons
Heater9 kW
Operating Temperature150°–180°F
Machine Dimensions (L × W × H)51″L × 50″W × 83″H
Shipping Dimensions (L × W × H)57″L × 48″W × 89″H
Single-Phase Voltage & Amps230V/1Ph (58A), 208V/1Ph (64A)
Three-Phase Voltage & Amps230V/3Ph (36A), 208V/3Ph (40A), 460V/3Ph (17A), 575V/3Ph (14A)

Standard Features

  • Space-Saving Roll-In Door: Allows easy access to the entire wash area for overhead hoist or forklift loading and minimizes stooping and lifting when loading heavy, awkward parts
  • Retractable Intermediate Spray Arm: Rotates down inside the cabinet to clean smaller parts at mid-level with or without the optional double-basket
  • Patented Removable Front-Access Debris Screen: Filters debris particles from the wash solution to ensure clear spray nozzle operation and safeguards small parts from washing into the sump
  • Integrated Automatic Oil Skimmer: Stainless steel disc and wiper blades remove floating oil and grease from the cleaning solution to prolong bath life
  • Door Safety Switch: Protects the operator from hot water spray if the roll-in door is opened mid-cycle
  • Low Water Shut-Off: Enhances safety and protects the 9 kW heating element by automatically turning the unit off if the water level drops too low

Optional Accessories & Fixturing

  • Containment Rings (28″ Diameter): Keeps loose heavy bolts, washers, collars, and fittings contained on the rotating turntable
  • 2-Tier Turntable & 4-Hook Parts Tree: Adds a second turntable level or hanging tree for tall shafts, hydraulic rods, and brackets
  • Small & Large Parts Baskets / Preferred Options Package: Parts tree, parts basket, containment ring, and oil drain container
  • Deluxe Kit: Includes side-mounted detail and pneumatic power brush with dedicated tray, sink, and sump
  • Filtration & Sump Sweep (Field Installed): Quickly removes sediment from the sump floor through 100-micron filters to extend wash-water life
  • Automatic Water Fill, 24-Hr / 7-Day Heater & Skimmer Timers, Hour Meter & 60-Mesh Debris Screen Tray Insert

Industries We Serve with the Cuda 2848

  • OTR Truck & Diesel Engine Repair Facilities: Standing 6-cylinder diesel blocks, cylinder heads, bellhousings, and heavy transmissions
  • Agricultural & Heavy Implement Dealers: Large 4-wheel-drive tractor housings, PTO assemblies, planetary hubs, and hydraulic valves
  • Steel Mill, Railroad & Industrial Maintenance: Tall pump castings, hydraulic payload cylinders, bearing blocks, and batch fastener cages

Your Local Cuda Partner in Northwest Indiana & Greater Chicago

Calumet Chicago Company is your authorized Cuda distributor and service center in Highland, Indiana, serving Lake, Porter, and LaPorte Counties (IN) and Greater Chicago (Cook, Will, DuPage, Kane, and Lake Counties, IL). The Cuda 2848 is available for direct purchase or through our Monthly Turnkey Lease Available program, backed by scheduled bimonthly service and wastewater reclaim through our Preventative Maintenance Program and multi-metal Cuda 1993 aqueous detergent. Call (708) 474-2343 to request pricing or schedule a live trial clean.

See Cuda Front-Load Parts Washers in Action

Cuda 2848 Questions and Answers

What size parts fit in the Cuda 2848?

The 2848 has a 28″ turntable, 48″ of working height and a 1,000-lb turntable load capacity with even weight distribution.

How much cleaning power does the Cuda 2848 have?

A 5 HP vertical seal-less pump delivers 110 GPM at 50 PSI through 18 nozzles, with a 9 kW heater and a 50-gallon sump at 150°–180°F.

What power does the 2848 need?

Single-phase 230V (58A) or 208V (64A), or three-phase 230V (36A), 208V (40A), 460V (17A) or 575V (14A).

Can I lease a 2848 or have it serviced?

Yes. Calumet Chicago Company offers purchase, turnkey monthly leases and a bimonthly preventative maintenance program with wastewater reclaim across Northwest Indiana and Greater Chicago. Call (708) 474-2343.

Compare Cuda Models & Selection Tools